The Zibro LC 135 Laser heater contains an electronically controlled burner. For starting up, the built-in fan and some other functions, a minimal amount of power is needed. No vent or gas connection is required. Odorless during operation.
A great advantage of these Laser heaters is the electronically controlled computer inside the heater. This ensures that the heater can be set precisely to the degree, for example. This heater is also equipped with a thermostat and a timer. Would you like the room to be heated to 20 degrees by 8 o’clock tomorrow morning? No problem!
The heater has a very fast, electronic starter. This ensures that the heater reaches its full capacity within a few minutes and that the room quickly attains the desired temperature. When the heater reaches the set temperature, it will operate modulatingly and burn at a lower level. When the temperature falls below the set temperature, the heater will automatically burn at a higher level again. In this way, you get the best efficiency from the heater and fuel.
Dimensions w x d x h (mm) 435x315x437 mm Weight in kg 11.5 kg Maximum heating capacity (m²) 56 Maximum heating capacity (m³) 140 Minimum heating capacity (m²) 21 Minimum heating capacity (m³) 54 Minimum heating output (W) 1050 Heating output (W) 3500 Minimum fuel consumption (l/h) 0.109 Maximum fuel consumption (l/h) 0.365 Minimum fuel consumption (gr/h) 67 Maximum fuel consumption (gr/h) 250 Minimum burn time (h) 15.5 Maximum burn time (h) 44 Tank capacity (L) 7.6 Power consumption during start-up 320 watt Power consumption after start-up 24 watt
Exceptions to factory warranty:
* Using incorrect fuel immediately voids the warranty.
* Upon first use, the right of return also expires.
Sold out
Sold out
Sold out
Sold out
