Zibro LC DX 32 Laser heater 3.2 Kw

The Zibro LC-DX 32 Laser heater contains an electronically controlled burner. For starting up, the built-in fan, and some other functions, a minimal amount of power is needed. No vent or gas connection is required.

This Zibro LC-DX 32 heater burns odorlessly when using the correct fuel and is therefore also ideal for use in the home.

A great advantage of this Laser heater is the electronically controlled computer it contains. This ensures that the heater can be set to the exact degree. This deluxe kerosene heater is also equipped with a thermostat and a timer. Do you want the room to be heated to 20 degrees by 8 o’clock tomorrow morning? No problem!

The Zibro LC-DX 32 has a very fast, electronic starter. This ensures that the heater reaches its full capacity within a few minutes and that the room quickly reaches the desired temperature. When the heater has reached the set temperature, it will operate modulatingly and burn at a lower level. When the temperature falls below the set temperature, the heater will automatically burn at a higher level again. In this way, you get the best efficiency from the heater and fuel.

• Thermostat
• Timer
• Energy-saving mode
• Overheating protection
• Frost protection
• Child lock
• Tip-over protection
• Temperature sensor
• Safety stop
• Portable: Yes
• Vent needed: No
• Min. capacity m²: 20 m²
• Max. capacity m²: 49 m²
• Min. capacity m³: 48 m³
• Max. capacity m³: 120 m³
• Max. capacity Watt: 3200 Watt
• Min. capacity Watt: 800 Watt
• Max. burn time per tank: 44 hours
• Tank capacity: 5.4 liters
• Min. temperature setting: 6°C
• Max. temperature setting: 28°C
• Max. fuel consumption: 0.323 l/h
• Min. fuel consumption: 0.083 l/h
• Anti-leak tank cap (cleangrip): Yes
• Power consumption (at start-up): 320 Watt
• Power consumption (continuous): 13 Watt
• Remote control: No
• Free transport cap: Yes
• Free fuel siphon pump: Yes
• CO² sensor: No
• Weight: 8 kg
• Dimensions: WxDxH: 38x30x44 cm
• Warranty: 4 years